Sony IPELA SNC-RZ50N Manuel D'installation page 53

Installation
1
Attach the fall-prevention wire rope to
the junction box in the ceiling.
Use a screw hole and a screw (not
supplied) in the junction box to attach
the wire rope.
Ceiling
Hole for wiring
2
Attach the upper ceiling bracket to the
junction box on the ceiling.
Align the holes in the bracket with those
in the junction box, and use appropriate
screws (not supplied).
There are elongated holes for the screws
along the rounded edges of the upper
ceiling bracket. Later, the front of the
camera will be positioned along this
edge. Face the camera toward the front,
adjust the aim, and attach it securely.
Ceiling
Front of the
camera
Installing the Camera
Upper
ceiling
bracket
15
GB