Preparing The Remote; Setting The Clock - Sony CMT-X3CD Mode D'emploi

Preparing the
Remote
Insert an R6 (size AA) battery (not supplied),
matching the polarities as shown below.
Notes on using the remote
 With normal use, the battery should last for
about six months.
 If you do not use the remote for a long period of
time, remove the battery to avoid damage from
battery leakage and corrosion.
8 GB

Setting the clock

1 Press /  to turn on the
system.
2 Press TIMER MENU .
If setting the clock for the first time,
proceed to step 4.
3
Press /  to select "CLOCK,"
then press
4 Press /  to set the hour,
then press
5
Press /  to set the minutes,
then press
Complete the clock setting.
Note
 The clock settings are reset when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the
system is off
Press DISPLAY  to display the clock. The
clock is displayed for about 8 seconds.
.
.
.