Sony CMT-X3CD Mode D'emploi page 31

Antenna:
FM lead antenna
Antenna terminals:
8 ohms unbalanced
Speaker section
Speaker system:
Full-range speaker
Passive radiator
Rated impedance:
8 ohms
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 4.0
Output:
BLUETOOTH Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m
Frequency band:
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method:
FHSS
Compatible BLUETOOTH profiles
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported content protection method
SCMS-T method
Supported codec
SBC (Sub Band Codec)
Transmission bandwidth
20 Hz - 20,000 Hz (with 44.1 kHz sampling)
1
* The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static
electricity, reception sensitivity, antenna's
performance, operating system, software
application, etc.
2
* BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
General
Power requirements:
AC 120 V - 240 V, 50 Hz/60 Hz
*1
*2
:
Power consumption:
28 watts
Dimensions (W/H/D) (incl. projecting parts):
Approx. 340 mm × 173 mm × 90 mm
Mass:
Approx. 2.3 kg
Supplied accessories:
Remote (RM-AMU212) (1), FM lead antenna
(1), Operating Instructions (this manual) (1)
Design and specifications are subject to
change without notice.
Standby power consumption: 0.5 W
(BLUETOOTH network ports off)
BLUETOOTH Standby mode: 5.9 W (BLUETOOTH
network ports on)
31 GB