Safety Instructions For Maintenance; Possible Malfunctions - Bartscher AT 110 Mode D'emploi

o Never use aggressive cleaning substances nor acids.
o Use only a soft cloth and never use any type of harsh implements which may
scratch the device.
o After cleaning, wipe the device dry with a soft cloth.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

PROBLEM
Device is connected to
power supply but
primary control light
doesn't come on.
Device is connected to
power supply but fails
to heat up.
Uneven results from
cooking/baking.
The above mentioned trouble cases are just exemplary and to give you orientation.
Should these or similar troubles occur, please switch off the device and stop use
immediately. Contact qualified technicians or the manufacturer for inspection and
repair.
POSSIBLE CAUSES
•
Improperly inserted
plug.
•
Main / time regulator
not set.
•
Temperature regulator
not set.
•
Damaged ventilator.
•
Damaged temperature
regulator.
SOLUTIONS
•
Remove and reinsert
plug properly.
•
Set main / time regulator.
•
Set temperature.
•
Contact the sales agent.
•
Contact the sales agent.
- 27 -