Cleaning and maintenance
60
8 t wood splitter
If you wish to put the wood splitter back into operation:
›
Open the filling screw on the oil tank roughly a 3/4 turn.
Changing oil
Oil change
first oil change
all further oil changes
Danger due to toppling wood splitter!
To change the oil, you must elevate the wood splitter slightly, so that
you can place the oil collection container beneath it.
›
Make sure the wood splitter cannot topple during the oil change.
›
If necessary, fasten the wood splitter on a suitable mounting with
round slings.
The discharge screw is located on the underside of the oil tank.
Fig. 10: Discharge screw
When?
after approx. 25-30 operating hours
approx. every 50 operating hours or
1 x annually
CAUTION
46-113, 46-114 | 11.2018