Cleaning, Maintenance And Repair; Preparing The Lawn Mower For Operation - Stihl RMA 443 PC Notice D'emploi

5 Preparing the Lawn Mower for Operation

► Store the battery separately from the mower and
charger.
► Store the battery in non-conductive packaging.
► Store the battery at temperatures between -10°C and
+50°C.

4.10 Cleaning, Maintenance and Repair

WARNING
￭ If the activation key and battery are inserted during
cleaning, maintenance or repair, the blade may
unintentionally be activated. This may result in serious
injury to people and damage to property.
► Pull out the activation key.
► Remove the battery.
￭ If the activation key and battery are inserted during
cleaning, maintenance and repair, self-propulsion may
unintentionally be engaged and the lawn mower may start
moving. This may result in serious injury to people and
damage to property.
► Pull out the activation key.
► Remove the battery.
￭ Abrasive cleaning agents, using a water jet for cleaning or
sharp objects may result in damage to the lawn mower,
blade and battery. If the lawn mower, blade and battery
0478-131-9959-A
are not cleaned correctly, components may no longer
operate correctly and safety devices may be disabled.
There is a risk of serious injury to persons.
► Clean the lawn mower, blade and battery as described
in this instruction manual.
￭ If the lawn mower, blade or battery are not maintained or
repaired correctly, components may no longer operate
correctly and safety devices may be disabled. This may
result in serous or fatal injury to people.
► Do not maintain or repair the lawn mower or battery
yourself.
► If the lawn mower or battery need to be maintained or
repaired: consult a STIHL specialist dealer.
► Maintain the blade as described in this instruction
manual.
￭ The user may cut themselves on sharp cutting edges
during blade cleaning, maintenance or repair. This may
result in injury to the user.
► Wear work gloves made from resistant material.
￭ The blade may become hot during sharpening. This may
result in the user burning themselves.
► Wait until the blade has cooled down.
► Wear work gloves made from resistant material.
5 Preparing the Lawn Mower for
Operation
5.1 Preparing the Lawn Mower for Operation
The following steps must be performed before commencing
work:
► Make sure that the following components are in safe
condition:
– Lawn mower, @ 4.6.1.
– Blade, @ 4.6.2.
– Battery, @ 4.6.3.
► Check the battery, @ 12.3.
English
45