Recording A Cd On An Md - Sony CMT-MD1 Mode D'emploi

Tips
• You can start playing from the desired track in
step 3.
1 Press CD/MD =0 or )+ repeatedly
until you find the desired track.
2 Press CD ^.
• Pressing CD ^ (or CD ( on the remote) when
the power is off automatically turns the power on
and starts CD play if there is a CD on the disc tray
(One Touch Play).
• You can switch from another source to the CD
player and start playing a CD by pressing CD ^
(or CD ( on the remote) (Automatic Source
Selection).
• If there is no CD on the disc tray, "CD NO DISC"
appears in the display.
Notes
• Do not use a CD with tape, seal or paste, on it as
this may damage of the system.
• Do not push the disc door closed, as this may
damage the system. Press CD 6 (or OPEN/
CLOSE CD on the remote) to close the disc door.
Recording a CD on
an MD
— CD-MD Synchro Recording
You can make a digital recording of a CD on
an MD, marking track numbers in the same
sequence as the original CD. If you use a
recorded MD, the system automatically
locates the end of the recorded portion and
starts the new recording from there. You can
also record a program of favorite tracks (see
page 31).
To turn on the system, press 1/u.
4
1/u
1/u (P p
= 0 ) +
– +
MD indicator
1
Insert a recordable MD.
With the
arrow
pointing
toward the
system
With the
label side up
and the
shutter slide
rightward
5 2,3
6
g
(P p
+
–
6
MD p MD 6
continued
15