Hapro Luxura V10 Série Mode D'emploi page 21

Note:
If you do not press any key for 60 seconds, you will exit the configuration mode automatically. Changes that have not been
saved ("SAVED") will be ignored. The standby message "LUXURA, IT'S YOUR BODY" will appear on the display.
The parameter "1" will appear at the top of the display and the current parameter setting will appear at the bottom
(number / "ON" / "OFF").
(see "Configuration menu overview" for the default, minimum and maximum settings for the adjustable
parameters)
Use the <3> and <4> keys to adjust the number accordingly.
Press <2> to save the chosen number.
(If you press <5> 1x, you will delete any changes that may have been made and you will return to the parameter
selection.)
The parameter "1" will appear at the top of the display and "SAVED" will scroll across the bottom to confirm that
the setting has been saved. You will now return to the parameter selection automatically.
The parameter "1" will appear at the top of the display and the name of the parameter will scroll across the
bottom.
You can change the other parameters using the same procedure described above.
Press <5> 2x to cancel the parameter selection and to exit the configuration mode. The standby message "LUXURA,
IT'S YOUR BODY" will appear on the display.
21