Hapro Luxura V10 Série Mode D'emploi page 17

Choose coin-op or stand alone
The appliance comes set up for use with an external timer or coin-op. To change this, the following procedure applies.
Press the following keys successively:
<5> <5> <4> <5> <3>
The main parameter "P1" will appear at the top of the display, and the name of the main parameter "UNIT" will scroll
across the bottom.
Press <2> 1x.
The parameter "1" will appear at the top of the display, and the name of the parameter "START TIME" will scroll across
the bottom.
Press <2> 1x.
The number "1" appears at the top of the display and the current parameter number appears at the bottom. This
number is the maximum tanning time (in minutes) per session.
Use the <3> and <4> keys to adjust the number accordingly.
Choose a number between "1" and "30" for stand alone use.
Choose "0" to use the sunbed with a coin-op.
Press <2> to save the chosen number.
17