Hapro Luxura V10 Série Mode D'emploi page 18

Reset hour counter for the lamps
18
1: ENG L
The parameter "1" will appear at the top of the display and "SAVED" will scroll across the bottom to confirm that the
number has been saved.
The parameter "1" will appear at the top of the display, and the name of the parameter "START TIME" will scroll across
the bottom.
Press <5> 2x to exit the configuration mode.
The message "LUXURA, IT'S YOUR BODY" will appear on the display.
The hour counter for the lamps should be reset after replacing the lamps.
Press the following keys successively:
<5> <5> <4> <5> <3>
The main parameter "P1" will appear at the top of the display, and the name of the main parameter "UNIT" will scroll
across the bottom.
Press <2> 1x.
1: ENG R