Iseki T31480 Notice De Montage page 67

6-3. Installation of the linkage on the tractor
Fig.6-2
a. Install ARM/MID/LH (3) onto BRACK-
ET/MID/LH (11) by using the PIN/16X43
(13) and RING PIN (15).
b. Install ARM/MID/RH (4) onto BRACK-
ET/MID/RH (12) by using the PIN/16X43
(13) and RING PIN (15).
c. Set BRACKET/REAR/RH (8) at the edge of the
LINK/REAR (5), then install the assembly onto
the tractor by using each 4 pcs of
BOLT/M12X25/S (27) and BOLT/M10X25/SP
(28).
d. Connect LINK/REAR (5) and CYLINDER (6)
by using PIN/15X71 (18) and RING PIN (15).
e. Connect LINK/REAR (5) to ARM/MID/LH (3)
by using PIN/12X42 (14) and RING PIN (15).
f. Connect LINK/REAR (5) to ARM/MID/RH (4)
by using PIN/12X42 (14) and RING PIN (15).
CHAPTER 6. INSTALLATION ON THE TH TRACTOR
41