Abus HomeTec Pro CFT3000 Mode D'emploi page 17

General settings
• When inserting the batteries, the ABUS logo appears for approx. 5 seconds; thereafter the
code field
• When waking the keyboard by knocking (Menu 5.2), the code field opens
• An acoustic feedback is given with each keyboard entry. Note: Signal can be turned off (Menu 5.3j).
• The first time the machine is used the admin code needs to be changed (factory setting 12345,
menu 5.3c). Memorise the new code or make a note of it somewhere that cannot be accessed by
unauthorised persons!
• For the entry of a code number an
• Multiple incorrect code entries result in a temporary blocked entry status
• After approx. 120 seconds without entry, the system changes back to the code entry status
• Low/empty battery for drive and keyboard shown on the display as warning
• As soon as "Automatic Locking" is enabled, the keyboard queries the status of the drive
in a pre-determined period (approx. every 15 minutes). If a door is reported as unlocked
in this time, it is automatically locked again.
Entry of the Admin Code is
mandatory here!
HomeTec_Pro_Tastatur_160729_V02 PL+HU.indd 17
cancel/ confirm/
exit select
ADMIN CODE:
12345
Navigation
is created on the display, i.e. 5 (-10) digits
• To teach the keyboard correctly menu
a-e is required
• Optional configuration options offer
the menu f-j.
0 9
-
Digits
17
27.09.16 15:40