Dörr DLP-1000 RGB Notice D'utilisation page 13

07.2.3 Pre-set Light Source
11 Incandescent Halogen
12 Flourescent Soft White
13 Flourescent Warm White
14 Flourescent White
15 Flourescent Day White
16 Camera Flash
17 Flourescent Daylight
18 Daylight Overcast
19 Daylight Shady
20 Daylight Blue Sky
The following functions only for kit Item No. 373483:
08 | OPERATION WITH LITHIUM ION BATTERIES
08.1 CHARGING THE LI-ION BATTERIES
Before first operation with batteries, please fully charge the Li-Ion batteries
(15) with the supplied battery chargers (14).
CAUTION
Only charge rechargeable Li-Ion batteries of the type NP-F750 with the supplied
battery charger! The charger is not suited to charge other battery types!
Insert the power cable (14e) to the cable socket of battery charger (14d) and
connect with an electrical outlet. The LED charging indicator (14a) lights up green.
Place the Li-Ion battery (15) over the centre of the charging slot (14c) and pay
attention to the correct polarity (markings +/- on the battery and in the char-
ging slot). Slide the battery fully forward until it touches the battery contact pins
(14b). If battery is inserted properly and the charging process has started, the LED
charging indicator (14a) lights up red. When battery is fully charged, the LED char-
ging indicator (14a) turns green. Slide the Li-Ion battery backwards and remove it
from the charging slot. Disconnect the battery charger from the electrical outlet.
CAUTION
Never leave the battery charger unattended while charging the battery. After
charging, disconnect the charger from the power supply.
NOTE
To avoid deep-discharge of the Li-Ion batteries when DLP-1000 light is not in
use for a longer period, please charge Li-Ion batteries up to approx. 60%.
08.2 INSERTING THE LI-ION BATTERIES
CAUTION
Before inserting or removing the Li-Ion batteries, make sure that the LED light
is turned off (main switch (9) to position O = Off).
Insert the Li-Ion batteries (15) into the battery slots (4) with the battery contacts
(15a) facing to the battery contact pins (4a). Slide the battery fully forward until it
touches the battery contact pins (4a).
Switch on the LED light at the main switch (9):
position I = On (operation with batteries).
After use turn off the LED light at the main switch (9, position O=Off) and dis-
connect from power source. Please remove batteries when the LED light is not
in use for a longer period.
To remove the Li-Ion batteries, slide the batteries backwards and remove them out
of the battery slots.
09 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recom-
mend a soft, slightly damp microfiber cloth to clean the outer parts of the device.
Turn off the device and disconnect from power source or remove batteries be-
fore cleaning. Store the device in a dust-free, dry and cool place. This device is not
a toy – keep it out of reach of children. Keep away from pets.
10 | TECHNICAL SPECIFICATIONS
Number of LEDs
Illuminance
Colour temperature
Power
Colour rendering index (CRI)
Operating voltage
Power adapter
Dimensions illuminated area
Dimensions
Weight
Item No. 373483 LED Continuous Light DLP-1000 RGB Kit
Input
Charger for NP-F750 Output
Dimensions
Weight
(Replace-) Sony NP-F750 Li-Ion battery 7,2 V
Battery
4400 mAh (≙ 31,68 Wh)
Light stand max. height approx. 215 cm
11 | SCOPE OF DELIVERY
Item No. 373485 LED continuous light DLP-1000 RGB single:
1x LED continuous light DLP-1000
1x Power adapter
1x Safety hints
Item No. 373483 LED continuous light DLP-1000 RGB kit:
2x LED continuous light DLP-1000
2x Power adapter
2x Light stand
4x Li-Ion battery NP-F750
4x Battery charger
1x Bag
1x Safety hints
13
120 x 3200 K LEDs + 128 RGB LEDs
approx. 2000 Lux/1 m
2700 - 9999 K
50 W
> 90 R
a
DC 15V 6A
AC 100~240 V, 50/60 Hz DC 15 V 6 A
approx. 20 x 20 cm
approx. 28,5 x 32 x 6 cm
approx. 1470 g
AC 100-240 V, 50/60 Hz
150 mA (max.)
DC 8,4 V/600 mA
approx. 8,5 x 4,6 x 4 cm
approx. 118 g