How To Use; Power Supply; Attachment And Removal Of Roller Holder - SilverCrest SHE 3 A1 Mode D'emploi

__GRA95821_B2.book Seite 63 Donnerstag, 5. September 2013 11:20 11
6.

How to use

• Remove all packing material.
• Check that the delivery is complete.

6.1 Power supply

WARNING! Risk of material damage! Be sure to observe
the correct polarity when inserting the batteries.
1. Slide the battery compartment lid 7 off the housing.
2. If necessary, replace the old batteries with new ones.
3. Slide the battery compartment lid 7 back on to the housing.
6.2 Attachment and removal of roller
holder
Attachment
1. Figure A: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller and the
device are above one another.
2. Press the roller holder 2 on to the device until it engages
audibly.
3. Check that it is secure.
Removal
• Press the button 6 and remove the roller holder upwards.
63
GB