Bosch WEU PLT 2 Notice Originale page 12

OBJ_BUCH-965-009.book Page 12 Friday, December 9, 2016 3:18 PM
12 | English
 The measuring tool is provided with a warning label (marked with num-
ber 15 in the representation of the measuring tool on the graphics page).
IEC 60825-1:2014,
< 1 mW, 635 nm
Laser Radiation
Do not stare into beam
Class 2 laser product
 If the text of the warning label is not in your national language, stick the
provided warning label in your national language over it before operat-
ing for the first time.
Do not direct the laser beam at persons or animals and do
not stare into the direct or reflected laser beam yourself,
not even from a distance. You could blind somebody, cause
accidents or damage your eyes.
 If laser radiation strikes your eye, you must deliberately close your eyes
and immediately turn your head away from the beam.
 Do not make any modifications to the laser equipment.
 Do not use the laser viewing glasses as safety goggles. The laser viewing
glasses are used for improved visualisation of the laser beam, but they do not
protect against laser radiation.
 Do not use the laser viewing glasses as sun glasses or in traffic. The laser
viewing glasses do not afford complete UV protection and reduce colour
perception.
 Have the measuring tool repaired only through qualified specialists
using original spare parts. This ensures that the safety of the measuring tool
is maintained.
 Do not allow children to use the laser measuring tool without super-
vision. They could unintentionally blind other persons or themselves.
 Do not operate the measuring tool in explosive environments, such as in
the presence of flammable liquids, gases or dusts. Sparks can be created
in the measuring tool which may ignite the dust or fumes.
Keep the measuring tool away from cardiac pacemakers. The
magnets 8 generate a field that can impair the function of cardiac
pacemakers.
 Keep the measuring tool away from magnetic data medium and magnet-
ically-sensitive equipment. The effect of the magnets 8 can lead to irrevers-
ible data loss.
Product Description and Specifications
Intended Use
The measuring tool is intended for horizontal and diagonal alignment of tiles and
laminate flooring panels.
The measuring tool 3 603 F64 000 is suitable for operation exclusively in
enclosed work sites.
1 609 92A 27J | (9.12.16) Bosch Power Tools