Pioneer MJ-L11 Mode D'emploi page 61

Additional information
Understanding error messages cont.
Message
Can't COPY An attempt is made to record copy-prohibited material.
NOT AUDIO The disc contains non-audio material.
UTOC ER W The UTOC data can't be written properly due to physical shock or
disc damage.
UTOC ER* The recorded UTOC data doesn't conform to MD standard or is
otherwise unreadable.
DIN UNLOCK The signal at the digital input isn't recognized by the recorder.
The signal coming from the
TOC ERR* The TOC data can't be read, the MD is out of standard, or the disc
is damaged.
SIO ERROR Internal communication in the unit has broken down.
Note: Error messages marked with an asterisk are followed by a number or other symbol.
Description
VIDEO
or of the DVD unit is analog.
1 2
Action
• Use a copy-permitted source
(an ordinary CD, etc.).
• Record via the analog input.
• Use another track.
• Use another MD.
• Turn power off then on again,
then retry UTOC writing. Make
sure the unit isn't moved during
UTOC writing.
• Erase the disc or use another
recordable MD.
• Check the connections, and
the output mode of the source
component.
• Switch the or input
1 2
VIDEO
select to digital.
• Use another MD.
• Turn power off then on again.
8
61
En