Checking The Setup/Operating Condition Of The Dkr-700/700P - Sony DKR-700 Mode D'emploi

Preparation
Checking the Setup/Operating
Condition of the DKR-700/700P
The DKR-700/700P's setup information and operating
conditions can be displayed on the screen.
1
2
1
Connect a video monitor to the video output
connector(s) on the rear panel of the DKR-700/
700P (see page 16(E)) and activate the DKR-700/
700P (see page 18(E)).
2
Press the DISP button/key.
Operation and setup information appears.
Note
If the "Live" item in the Capture/Rec Setup menu
is set to Thru, operation and setup information will
not be displayed when the DISP button/key is
pressed.
For more information on the Capture/Rec Setup menu,
see page 41(E).
20(E)
Video output
connector(s)
1
Video monitor