Structure And Usage Of The System Setup Menu - Sony DKR-700 Mode D'emploi

To change the setup values
1
Move the cursor to the desired item using the
button/key.
≥
2
Change the setting using the
The settings for each item are as follows:
Mode: To display the input signal type and the DKR-
700/700P's operating condition, set to On.
Image No: To display the image number of the next
image to be recorded or of the image currently
being played back, set to On.
Quality: To display the image quality setting, for
either record or playback, set to On.
Remain: To display the number of images that may
be recorded in the remaining disc space, set to On.
Disc Name: To display the disc name of the disc
currently in the DKR-700/700P, set to On.
Title: To display the name of the next image to be
recorded or of the image currently being played
back, set to On.
ID No: To display the ID number of the next image
to be recorded or of the image currently being
played back, set to On.
Date: To display the recording date (y/m/d) of the
image currently being played back, set to On.
Time: To display the recording time (h/m/s) of the
image currently being played back, set to On.
or
˘
or button/key.
¿ ÷
Structure and Usage of the
System Setup Menu
Calling up the System Setup menu
1
In the main menu, press the
move the cursor to the "System" line.
[Main]
Input: RGB
Video: Frame
Setup
Source
Capture/Rec
Play
Disp
System
User
[ ] Select [EXEC] Next Menu
µ
2
Press the EXEC button (or the EXE key on the
RM-C700).
The System Setup menu appears.
[System Setup]
Flash: Off
Rec Tally: High
RS-232C: RM-C700
Baud Rate: 9600
FS1 Mode: A
Disp Color: White
Beep: On
Key Click: Off
Rec End: Off
Date: 96-01-01
Time: 00:00
[ ] Select [ ] Set [MENU] Menu
µ Mm
To return to the main menu
Press the MENU button/key.
or button/key to
˘ ≥
45(E)