Structure And Usage Of The Play Setup Menu - Sony DKR-700 Mode D'emploi

Live: Selects whether the input video signal will be
output as an "EE" (Electric to Electric)
passed directly to the outputs (as a simple loop-
through "Thru" signal).
If this item is set to either EE/Thru or Thru, the
next menu item will change from "Review" to
"Timer."
Note
While a menu is displayed on the screen, the
output will be an EE signal even when either EE/
Thru or Thru is selected. Remove the menu before
setting this item.
EE: The output will always be an EE signal.
EE/Thru: The output will be an EE signal except
while recording, when the output will switch to
a Thru signal.
Thru: The output will be a Thru signal, except for
when an image from the DKR-700/700P
internal memory is being output (such as when
the CAPTURE key is pressed).
Review/Timer: When the previous menu item
"Live" is set to EE, this item will be "Review."
When "Live" is set to EE/Thru or Thru, this item
will change to "Timer."
a)
Review: To automatically review an image
immediately after it is recorded, set this item to
the desired playback time. The time may be
set to 1 second, 3 seconds, 5 seconds, 7
seconds, 10 seconds or Cont (continuous). To
turn off the review function, set this item to
Off.
Timer: Select whether or not to display a memory
image after it is recorded. When set to On, the
image stored in memory will be displayed for
several seconds, and then the display will
revert to the input image. If set to Off, the
input image will be displayed immediately.
When you set Rec Mute to "On", Timer
automatically changes to "Off".
Review Mode: Select the image to be reviewed.
When set to "Capture", the recorded image held in
memory is reviewed; when set to "Play", the
image(s) on the disc is (are) reviewed.
Auto Rec: When performing automatic recording,
this item sets the interval at which images are to
be recorded. The time may be set in a range from
5 seconds to 60 minutes. To turn off the automatic
recording function, set this item to Off.
Overwrite: To allow recording over images already
recorded on the disc, set to On.
Structure and Usage of the Play
1)
signal, or
Setup Menu
Calling up the Play Setup menu
1
In the main menu, press the
move the cursor to the "Play" line.
[Main]
Input: RGB
Video: Frame
Setup
Source
Capture/Rec
Play
Disp
System
User
[ ] Select [EXEC] Next Menu
µ
2
Press the EXEC button (or the EXE key on the
RM-C700).
The Play Setup menu appears.
[Play Setup]
Mode:
Play Mute: Off
Auto Play
Interval:
Direction: Forward
Auto Start: Off
[ ] Select [ ] Set [MENU] Menu
µ
a) This item is set to Main on the DKR-700P at shipping.
To return to the main menu
Press the MENU button/key.
or button/key to
˘ ≥
a)
Auto
5 sec
Mm
43(E)