Product Description - Sharp LL-T15S1 Mode D'emploi

Front view
1 2
1. MENU button .......................... This button is used to pop-up, select and close the OSD Menu.
2. SELECT button ....................... When the On Screen Display (OSD) menu is displayed, choose the menu option to
3. buttons ............................ When the OSD menu is displayed:
4. BRIGHT button ....................... When the OSD menu is displayed:
5. Power LED .............................. This LED is lit green when in use and orange when in power-saving mode.
6. Power button ........................... Pressing this button turns the power on. (After turning the power on, it may take a
7. Speakers ................................ Audio entering via the monitor and the external device connected to the monitor
8. Brightness sensor .................. Measures the brightness of the surrounding environment.
9. Microphone terminal .............. A microphone (to be purchased separately) can be connected here.
10. Headphone terminal .............. Headphones (to be purchased separately) can be connected here.
11. Audio input terminal ............... A computer's audio output terminal can be connected here. (The audio cable
12. Microphone output terminal ... A computer's microphone terminal can be connected here. (The audio cable
13. Power terminal ........................ Connect the AC adapter (included) here.
14. RGB signal cable ................... Connects to the computer's analog RGB output terminal.
15. Ventilation openings .............. Note: Never block the ventilation openings as this may lead to overheating inside

Product description

Left side surface
7
8
4 5 6
3
be adjusted.
Change or adjust the adjustment values by switching between the OSD options
contents.
When the backlight adjustment bar is displayed:
The brightness of the backlight can be adjusted.
When the OSD menu / backlight adjustment bar is not displayed:
The speaker volume can be adjusted.
The OSD menu disappears.
When the OSD menu is not displayed:
Switch between turning the automatic brightness adjustment function [ON] and
[OFF].
little time before the screen displays.)
Press the button again to turn the power off.
can be heard.
included should be used.)
included should be used.)
the monitor and result in malfunction.
10
Rear view
9
10
11 12 13
15
14