Hartke TX600 Manuel Du Propriétaire page 2

Important Safety Information
This lightning flash with arrowhead symbol within an equilateral triangle is in-
tended to alert the user to the presence of non-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall
remain readily operable.
Protective earthing terminal. The apparatus should be connected to a mains socket outlet with a
protective earthing connection.
Voltage selector: Used to adjust the input rating (110-120Vac 50/60Hz and 220-240Vac 50/60Hz),
please just insert the mains power plug into the socket-outlet with voltage within the setting of the
selector. The current ratings of mains fuse links are different for different input rating (see marking
for details), and the fitted mains fuse link was just related to the input rating as setting of the selector
during factory assembly line work, please ask a qualified personnel to help you replace the mains fuse
link before you adjust the voltage selector.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference,and (2)this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Samson Technologies Corp.
©2016, V2
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
www.samsontech.com
2
ATTENTION
RISQUE DE CHOC ÉLECTRONIQUE -
NE PAS OUVRIR