Dometic COOLMATIC CRX1065D Instructions De Montage Et De Service page 19

CRX
Determine the required cross section of the cable in relation to the cable length
according to fig. 7, page 6.
Key to fig. 7, page 6:
Coordinate axis
l
∅
A
NOTICE!
Make sure the polarity is correct.
Connect your refrigerator to a plug socket which is fuse-protected with at least
15 A (at 12 Vg) or 7.5 A (at 24 Vg) (fig. 8 1, page 6).
Connect the red cable (fig. 8 rt, page 6) to the positive terminal of the battery.
Connect the black cable (fig. 8 sw, page 6) to the negative terminal of the
battery.
7.6 Connecting the refrigerator to AC voltage
D
DANGER! mortal danger!
• Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
• If you are operating your refrigerator on board a boat with an
AC mains connection using a shore connection, you must install a
residual current circuit breaker between the AC mains supply and
the refrigerator.
Seek advice from a trained technician.
Connecting the ACDC version to AC voltage
Proceed as follows when you connect the refrigerator to the AC supply:
Plug the connector into the AC socket (fig. 9 1, page 6).
EN
Installing and connecting the refrigerator
Meaning
Cable length
Cable cross section
Unit
m
mm²
19