Philips MAGNAVOX AZ 2725 Mode D'emploi page 11

CD DISPLAY INDICATION
– CD OPEN: When the CD door is open.
– Total track number and playing time: In stop position.
– Current track number and elapsed playing time: During CD play.
– In PAUSE position, the display freezes and the elapsed playing time
flashes.
– SHUFFLE/REPEAT: When the respective mode is activated.
– PROGRAM: When program function is active.
– no SEL: PROGRAM button is pressed but no tracks are selected.
– prog: When you store a track.
– FULL: Maximum number of tracks is stored.
PROGRAM
– no prog: When PROGRAM is stopped/erased.
– no diSC: Error in CD operation or with the CD (see 'TROUBLESHOOTING').
PLAYING A CD
1. Set the source selector 6 to CD.
2. Press OPEN ! to open the CD door.
3. Insert the AUDIO CD, printed side facing up. To close the CD door,
push the door down.
4. Start playback by pressing PLAY•PAUSE 2; 0.
5. Adjust the sound using the VOLUME 3 4 2, TONE 4 and DBB 1
controls.
6. To interrupt playback, press PLAY•PAUSE 2; 0. Press
PLAY•PAUSE 2; 0 again to continue playback.
7. Press STOP 9 0 to stop CD playback.
8. Set the source selector 6 to TAPE/OFF position to switch off the set.
Note: CD playback will also stop when:
– The CD has reached the end;
– The CD door is opened;
– The source selector is in the TAPE/OFF position.
SEARCH ∞ or §
Selecting a different track during playback
– You can jump to the next track by pressing SEARCH § 0 once. If you
want to skip more than one track, press SEARCH § 0 more than
once until the display shows the desired track number.
– If you want to repeat the current track from the beginning, press
SEARCH ∞ 0 once. If you want to repeat one of the previous tracks,
press SEARCH ∞ 0 more than once until the display shows the
desired track number.
Starting with a particular track
1. In the STOP position you can select a desired track using the SEARCH
§ or ∞ button 0.
2. Press PLAY•PAUSE 2; 0 to start playback.
CD PLAYER
SHUFFLE REPEAT ALL
SWFMMWLWAM
STEREO PROGRAM
CD
TUNER
11