Operations; Playing A Record - Sony PS-LX350H Mode D'emploi

Operations

Playing a Record

1
2
4
1
Place a record on the platter.
Note
Place only one record on the platter at a time. If two or
more records are stacked on the platter, the stylus will
not make proper contact with the grooves and the
quality of reproduction will be impaired.
2
Turn POWER to "ON" to turn on the turntable.
The strobo lamp lights up.
3
Set the PITCH CONTROL to the center position
and press 33 or 45 to select the platter speed.
The indicator for the selected speed lights up.
4
Press START/STOP.
The platter starts rotating.
If you select 45 r/min when the turntable is
connected to a 50 Hz power source, the innermost
row of the strobo dots should appear to stand
still.
45
33
5
Remove the protective cover from the cartridge
and disengage the arm stopper.
6
Shift the cueing lever backward.
Move the tone arm to the desired position over
the record.
7
Set the cueing lever forward.
The tone arm descends slowly to the record and
playback begins.
8
Adjust the volume on your amplifier.
6,7
To stop playing
1 Shift the cueing lever backward to lift up the tone
5
arm, return the tone arm to the arm stand.
3
Attach the protective cover onto the cartridge to
6
prevent damage to the stylus.
3
2
Press the START/STOP button.
The platter stops rotating.
5
Shift the cueing lever forward and fix the tone
arm with the arm stopper.
3
Turn POWER to "OFF" to turn the turntable off.
To pause playback
Shift the cueing lever backward to raise the stylus off
the record during playback.
To listen to a different part of the record
1 Shift the cueing lever backward to raise the stylus
during playback.
2 Move the tone arm to the position you desire.
3 Shift the cueing lever forward.
To play a 17-cm record
Place the supplied 45 r/min adaptor on the spindle.
When you have finished using the adaptor, put it back
in the adaptor tray.
If the strobo dots do not stand still when the PITCH
CONTROL is set to the center position
Slide toward + or – to adjust the platter speed so that
the respective strobo dots appear to stand still.
Note
When the unit is turned on, the speed is automatically set to
33 r/min.
If you have an extra headshell, retain it in the
headshell holder.
50 Hz
60 Hz
50 Hz
60 Hz
GB
7