Operations; Playing A Record - Sony PS-LX250H Mode D'emploi

Operations

Playing a Record

1
2
STOP
1
Place a record on the platter.
Note
Place only one record on the platter at a time. If two or
more records are stacked on the platter, the stylus will
not make proper contact with the grooves and the
quality of reproduction will be impaired.
2
Press the Speed select button to select the speed.
3
Set the SIZE SELECTOR to 17 or 30.
4
Turn the protective cover to expose the stylus,
and close the dust cover.
5
Press START.
The platter starts rotating.
6
Adjust the volume on your amplifier.
To stop playing
Press STOP.
To pause playback
Press the UP/DOWN button to raise the stylus off the
record.
To listen to a different part of the record
1
Press UP/DOWN button.
5
2 Move the tone arm to the position you desire.
4
3 Press UP/DOWN button.
3
The tone arm descends to the record.
To play a 17-cm record
UP/DOWN
Place the supplied 45 r/min adaptor on the spindle.
When you have finished using the adaptor, put it back
in the adaptor tray.
GB
5