Tilt Protection; The Ideal Location; Before Using The Appliance The First Time - Unold BOX IP21 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
DE

TILT PROTECTION

EN
FR
NL
IT
ES

THE IDEAL LOCATION

1.
Maintain an adequate safety distance (at least 1 meter) to other objects,
PL
such as furniture, curtains, etc.
2.
Only place the appliance in operation in a vertical position.
3.
Ensure that air can flow in and out unhindered - do not, under any circum-
stances, cover the air inlets of the appliance.
4.
Only place the appliance on a solid and level substrate. Do not place the
appliance on soft surfaces (sofa, bed) because the appliance can tip over.
5.
In addition, ensure that the appliance is not set up on deep-pile carpets or
in dusty environments.
6.
For safety reasons, the appliance must not be used in the vicinity of sinks,
bathtubs, or water connections.
7.
Never place the appliance directly under an electrical outlet, and ensure
that the power socket used is easily accessible at all times.
8.
Check whether the power cord is routed in such a manner that no one can
stumble over it.
9.
The power cord should not touch any housing parts, this could cause the
cable to melt.
Be aware that the appliance can become very hot - fire hazard! Particularly
ensure that children are kept away from the appliance.

BEFORE USING THE APPLIANCE THE FIRST TIME

1.
Remove all packaging materials and any transport safeguards. Keep packag-
ing materials away from children - danger of suffocation!
2.
Check whether all listed accessory parts are present and intact.
3.
Comply with all instructions that are specified in the chapter, "The ideal
location", and find a suitable location.
4.
When you use the appliance for the first time, or if it has not been operated
for an extended period of time, a slight odour can occur.
22 von 68
Copyright UNOLD AG | www.unold.de
When you lightly shake the appliance you will hear a noise
coming from the interior of the appliance. This is caused by
the tilt protection technology used; there is no defect in the
appliance! The tilt protection switches the appliance off im-
mediately, as soon as the appliance tilts to a position where
safe operation is in jeopardy.
Stand 24.2.2020

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

86450

Table des Matières