Operating Pressure Vessels; Layout And Items Supplied; Important - Parkside PKO 400 B2 Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The work area must exceed 30 m
ficient ventilation must be ensured during
spraying and drying. Do not spray against the
wind. Always adhere to the regulations of the
local police authority when spraying combus-
tible or hazardous materials.
Do not process media such as white spirit,
butyl alcohol and methylene chloride with the
PVC pressure hose. These media will destroy
the pressure hose.

2.4 Operating pressure vessels

You must keep your pressure vessel in good
working order, operate the vessel correctly,
monitor the vessel, carry out necessary main-
tenance and repair work immediately and
meet the relevant safety precautions.
The supervisory authority may enforce essenti-
al control measures in individual cases.
A pressure vessel is not allowed to be used if
it has faults or deficiencies that can endanger
workers or third parties.
Check the pressure vessel for signs of rust
and damage each time before using. Do not
use the compressor with a damaged or rusty
pressure vessel. If you discover any damage,
then please contact the customer service
workshop.
Do not lose these safety instructions

3. Layout and items supplied

3.1 Layout
1. Transport handle
2. Pressure switch
3. Pressure regulator
4. Quick-lock coupling
(regulated compressed air)
5. Pressure gauge
(for reading the preset pressure)
6. Pressure gauge
(for reading the vessel pressure)
7. Pressure vessel
8. Supporting foot
9. Drain plug for condensed water
10. Axle screw
Anl_4010162.indb 49
Anl_4010162.indb 49
GB
3
and suf-
1 1. Wheel
12. Non-return valve with discharge line
13. Compressor pump
14. Housing
15. Air fi lter
16. Oil sealing plug with oil dipstick
17. ON/OFF switch
18. Oil drainage screw
19. Safety valve
20. Quick-lock coupling
(unregulated compressed air)
21. Oil fi ller opening
22. Washer
23. Spring washer
24. Nut
25. Screw
26. Washer
27. Washer
28. Nut
29. Wheel cap
3.2 Items supplied
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.

Important!

The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a danger of swallowing or suffocating!
- 49 -
25.03.13 15:50
25.03.13 15:50

Publicité

Table des Matières
loading

Table des Matières