Caring For Your Label Maker - Dymo LabelManager 210D Guide D'utilisation

Caring for Your Label Maker

Your label maker is designed to give you long and
trouble-free service, while requiring very little
maintenance. Clean your label maker from time to time
to keep it working properly. Clean the cutter blade each
time you replace the tape cassette.
To clean the cutter blade
1. Remove the tape cassette.
. Press and hold down the cutter button to expose the cutter
blade. See Figure 6.
. Use a cotton ball and alcohol to clean both sides of the blade.
To clean the print head
1. Remove the tape cassette.
. Remove the cleaning tool from inside the label compartment cover.
. Gently wipe the padded side of the tool across the print head. See Figure 6.
LM210D_manual_UK-WEU.indd 17
Print head
Cutter
button
Figure 6
17
27-06-2007 17:11:16