Creating Fixed-Length Labels; Using Mirror Text; Using Symbols And Special Characters; Adding Symbols - Dymo LabelManager 210D Guide D'utilisation

Creating Fixed-Length Labels

Normally, the length of the label is determined by the length of the text. However, you can
choose to set the length of the label for a specific application. When you choose a fixed
label length, the label text is automatically resized to fit the label. If the text cannot be
adjusted to fit within the fixed label length, a message is displayed showing the smallest
possible label length for this text. You can choose a fixed length label up to 400 mm long.
To make your label a fixed length
1. Press the
Select Label Length and press
.
Select Fixed and press
.
4. Select the length for your label and press

Using Mirror Text

The mirror format allows you to print text which reads from right to left, as you would see
it in a mirror.
To turn on mirror text
1. Press the
. Select Mirror and press
Select On and press
.

Using Symbols and Special Characters

Symbols, punctuation, and other special characters can be added to your labels.

Adding Symbols

The label maker supports the extended symbol set shown below.
1
LM210D_manual_UK-WEU.indd 12
2
key.
}
}
.
2
key.
}
.
}
.
.
}
.
27-06-2007 17:11:11