AEG ELECTROLUX EHS 8680 X Notice D'utilisation Et Instructions D'installation page 23

Time setting
1. Cooking zone selection.
The „timer function" control lamp of the adjustable
cooking zone flashes.
2. Set the required time via the „heat setting
selection" sensor fields
The set time is indicated in the timer display.
For a faster adjustment, touch the "heat
setting selection" sensor fields
for such time until the required value is
obtained.
The time for the selected cooking zone is activated
after approx. five seconds.
If the time is set for several cooking
zones the timer display will indicate the
shortest cooking time in each case and
the „timer function" control lamp of the
appropriate cooking zone will flash.
Once the time has expired
timer display, the „timer function" control lamp
flashes and an acoustic signal is sounded for
approx. two minutes.
The acoustic signal is switched off by
touching the „timer" sensor field
Remaining time display
1. Select the required cooking zone.
The remaining time is indicated in the timer
display.
The "timer function" control lamp belonging to the
cooking zone flashes.
or .
or
is indicated in the
.
23