Switching Off And Disconnecting The Appliance; Setting The Temperature; Super Function - CONSTRUCTA CK587 Série Notice D'utilisation

Switching off and
disconnecting the appliance
Switching off the appliance
Press the # button.
■
The appliance no longer cools.
Disconnecting the appliance
If you do not use the appliance for a
prolonged period:
Press the # button.
1.
The appliance no longer cools.
Pull out the mains plug or switch off
2.
the fuse.
Clean the appliance.
3.
Leave the appliance open.
4.

Setting the temperature

Recommended temperature
Refrigerator compartment:
Refrigerator compartment
Keep pressing the button °C until
■
the display indicates the required
temperature.
Freezer compartment
The temperature in the refrigerator
compartment will affect the temperature
in the freezer compartment. Change the
temperature in the refrigerator
compartment in order to change the
temperature in the freezer compartment.
Temperatures which are set higher in
the refrigerator compartment will
increase temperatures in the freezer
compartment.
Sticker OK
(not all models)
You can use sticker OK to check
whether the temperature in the
refrigerator compartment reaches +4 °C
or lower.
If the sticker does not indicate OK,
gradually reduce temperature.
When the appliance is switched on, it
may take up to 12 hours until the set
temperature is reached.
Correct setting

Super function

When the Super function is switched on,
the freezer compartment and
refrigerator compartment will become
+4 °C
colder.
Starting the Super function, e.g.:
to freeze food solid as quickly as
■
possible
4 ...6 hours before freezing food
■
weighing 2 kg or more
to use the max. freezing capacity
■
~ "Maximum freezing capacity"
on page 29
Note: When Super cooling is switched
on, increased operating noise may
occur.
After approx. 2 ^ days the appliance
switches to normal operation.
Starting/ending Super function:
Press the °C button.
■
The super display lights up when the
Super function is switched on.
Operating the appliance en
27