KRESS 800 FDF Mode D'emploi page 18

18 English
tain residual risks that cannot be completely pre-
vented through safety mechanisms. Therefore,
electrical tools must always be operated with the
EN
necessary caution.
3. Device description
Read all the warnings and instruc-
tions before using the equipment.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Device components
1 Mains cable module
2 Locking button
3 Motor housing
4 Handle
5 Column guide
6 Stop
7 Marks
8 Protective guard
9 Slip protector
10 Locking screw for height adjustment
11 Index stop for height adjustment
12 Lock nut for index stop
13 Stop screw for index stop
14 Scale for height adjustment
15 Ejector adapter
16 On/Off switch
17 Cutting depth thumbwheel
18 Depth stop adjustment
19 Adjusting screw for depth stop adjustment
20 Lock nut for depth stop adjustment
21 Locking screw for angle adjustment
22 Angle scale
23 Spindle lock button
24 Dust collector
25 Adapter
26 Base plate
27 Screws (4x)
28 Cover
29 Two-pin spanner
FDF-EN / 0802
30 Clamping nut
31 Routing blade
32 Supporting flange
Illustrated or described accessories
are not necessarily included in the
scope of delivery
Scope of supply
See packaging
Intended Use
The 800 FDF biscuit jointer is used for routing
grooves in solid wood, plywood, particle boards,
fibreboards, Plexiglas and artificial marble with
biscuit types No. 0, 10, 20, S6, H9 Simplex und
Duplex, as well as for milling resin pockets in solid
wood.
Requirements for the user
The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.
Technical data
Biscuit Jointer
Input power
Output power
No-load speed
Spindle thread
Blade, inside Ø
Routing Ø, max.
Routing blade/hub thickness
Cutting depth
Swivel range
Weight
Your power tool is double-insulated
in accordance with EN 60745; For
this reason an earth wire is not
required.
The device is suppressed against radio and TV
broadcasts, in accordance with EN 55014-1 and
is immune to disturbances in accordance with EN
55014-2
Device description
800 FDF
Watt 800
Watt 420
-1
min
11000
M10
mm 22
mm 100
mm 4/3
mm 19
0 - 90°
kg 3,1