Milwaukee 5192 Manuel De L'utilisateur page 3

1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out
microscopic particles.
1. Cord
2. Collet nut
3. Collet flange
4. Toggle switch
5. Paddle switch
6. Trigger switch
1
6
SPECIFIC SAFETY RULES
Symbology
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current/
Direct Currenty
No Load Revolutions
per Minute (RPM)
Amperes
FUNCTIONAL DESCRIPTION
1
5
3
2
Cat. No. 5196
Specifications
Volts
Cat.
No. AC/DC
A m p s
120
5192 4.5
5194 120
4.5
5196
120
11
1
4
Cat. No. 5194
2
No Load
RPM
21,000
21,000
14,500
Cat. No. 5192
2
page 3