Sharp Home Appliances KA-70Z68BNM-EU Notice D'utilisation page 15

Defrost
Turbo
Function
Bottom
Function
Top Bottom
Function
Static
Function
Pizza
Function
Double Grill
Adjusting the Time of Day
When the oven is switched on for the first
time after installation, "0.00" will flash on the
display. Press the " " sensor button, or the
"+" and "-" buttons simultaneously. The
colon ´:` on the display will flash. You can
adjust and set the time of day using the "+"
and "-" sensor button. The time must be set
to enable use of the oven functions.
Adjusting the Cooking Time
Adjusting the Minute Minder
To set a Minute Minder timer, press the
alarm sensor button " ", "0.00" will appear
on the Timer display and the " " symbol
will flash. Use the "+" and "-" sensor buttons
to adjust the desired warning time period
while the " " symbol is flashing. Once you
have completed setting the time period,
wait until the " " symbol stops flashing and
remains illuminated. The audible warning
time will be set.
When the timer reaches zero, an audible
warning will sound and the " " symbol will
flash on the screen. Pressing "+" or "-" will
stop the audible warning and the symbol
will disappear from the screen.
Adjusting the Cooking Duration Time
This function helps you to cook for a fixed
period of time. Prepare the food for cooking
and put it in the oven. Then, select the
desired cooking function and the
temperature. Press the " " sensor until you
see the Duration Time symbol " "on
the Timer display screen. Set the
Function Description
Double Grill
3D Function
Cleaning
Function
Temperature
Display
Time Display
Mode
required cooking period using the "+" and
"-" sensor buttons while the timer is in this
position. After set the required cooking
period, " " appear on the timer display
screen. When you have completed the
adjustment, wait until the current time of
day is displayed on the screen and until the
Duration Time symbol remains illuminated.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and " " will flash on the screen. Press any
sensor button on the control unit to stop the
warning sound, " " will continue to flash.
Press the "+" and "-" buttons simultaneously
to exit " " mode.
Adjusting the Cooking End Time
This function is used to begin cooking
after a certain period of time and for a
specific duration of time. Prepare the food
for cooking and put it in the oven. Then,
select the desired cooking function and the
temperature.
Press the " " sensor button until you see
the Duration Time symbol " " and " "
a p p e a r o n t h e Ti m e r display
screen. Set the required cooking period
using the "+" and "-" sensor buttons while
the timer is in this position. Then, press the
" " sensor button until the " " symbol is
d i s p l a y e d , t h e t i m e o f day and the
Cooking Duration Time symbol will flash.
Adjust the cooking finish time using the "+"
and "-" buttons while the timer is in this
position. When you have completed the
adjustment, wait until the current time of
day and " " remain illuminated on the
T i m e r display.
EN - 15
Auto Cooking
Temperature
Bar
Thermostat
Minus
Plus
Key Lock
Meat probe stop
Meat Probe
Cooking Time
Cooking end
time
Minute Minder
Lamp