Maintenance Contract; Spare Parts; Care & Cleaning; Care Instructions - Rohde HMT 600 Manuel D'utilisation Original

11.4.

Maintenance contract

INFORMATION
Contact ROHDE GmbH for advice and to agree on a maintenance contract for your ROHDE
product(s).
11.5.

Spare parts

Replace defective components immediately. Only use ROHDE original spare parts.
NOTE
Spare parts and accessories that have not been supplied by the manufacturer have not been
tested and not approved.
12. Care & cleaning
WARNING
For safety reasons, the power plug must be removed from the socket before cleaning!
NOTE
The pottery wheel must not be hosed down with water to clean it.
NOTE
Do not use compressed air for cleaning purposes.
12.1.

Care instructions

Make sure that no clay or water overflows and gets into the electrical system or the motor. This can damage

the machine.
The splash pan should be emptied after each throwing process and must not overflow.

The splash pan has a rim and can be cleaned easily.

If the clay is already dry, you can soak it again and after a short time remove it easily with a cloth or rag.

The contents of the splash pan can be emptied into a bucket through the drain and reprocessed if necessary.

The aluminium turntable and the splash pan can be removed for thorough cleaning.

Immediately remove residues of clay and water from the wooden surfaces.

52 / 207 - EN -