Changes To The Machine; Reasonably Foreseeable Misuse; Quick Start Guide - Rohde HMT 600 Manuel D'utilisation Original

4.2.

Changes to the machine

DANGER
Risk of serious personal injury and property damage and even death due to subsequent and
unauthorised changes to the pottery wheel.

4.3.

Reasonably foreseeable misuse

Reasonably foreseeable misuse includes:
 Operation by insufficiently trained and qualified personnel
 Letting clay or water damage electrical or mechanical components of the machine
 Use of unapproved spare and wear parts
 Exceeding the maximum designed weights
 Use of unsuitable pottery (material type, weight and volume)
 Failure to comply with the recommended maintenance intervals or improper maintenance
 Necessary repairs or maintenance are not carried out.
 Necessary cleaning work is not carried out.
 Use of non-approved cleaning agents
 Use for training and education purposes without permanent and sufficient supervision by trained and qualified
personnel
 Use in care facilities for children, adolescents or disabled people without permanent and adequate supervision
by trained and qualified staff
 Extending the power cable with an extension cable
 Using the machine as a step or climbing aid
 Placing objects of any kind (everything except ceramic clay) on the turntable and putting the machine into
operation
5.

Quick start guide

WARNING
In addition to this quick start guide, please observe all the other instructions in these operating
instructions!
Step Description
Starting up
Plug the power cord into the pottery wheel.
1
2 Plug the foot pedal into the pottery wheel.
3 Put the foot pedal into the OFF position.
4 Set the selector switch for the direction of rotation to neutral.
5 Plug the power cord into the socket (extension cords are not permitted).
6 Switch on the machine with the green button.
7 Select the desired direction of rotation with the selector switch.
Operate the foot pedal.
8
9 The machine starts up.
Shutting down
1 Put the foot pedal into the OFF position.
2 Machine stops.
Set the selector switch for the direction of rotation to neutral.
3
4 Switch off the machine with the red button.
Pull out the power plug.
5
Please note that changes to the machine that do not correspond to the delivery state
and were not subsequently carried out by the manufacturer are not permitted.
38 / 207 - EN -