Setting The Direction Of Rotation; Operating The Foot Pedal - Rohde HMT 600 Manuel D'utilisation Original

9.2.

Setting the direction of rotation

Direction of
rotation
None
Clockwise
Anticlockwise
Changing the direction of rotation during operation:
1. Put the foot pedal in the OFF position and wait for the turntable to stop.
2. Set the selector switch to position "0".
3. Set the selector switch to the other direction.
9.3.

Operating the foot pedal

Operation of the foot pedal:
Position on the foot pedal
Pedal in position 0 (rest position)
Pedal at maximum position
Pedal in any position between
"0" and "MAX"
Instructions for use:
 To operate the pottery wheel, the jack plug of the foot pedal must be plugged into the machine and then
pressed.
 The speed of the turntable is continuously regulated by pressing the foot pedal.
 The foot pedal can also be raised so that it can be operated by hand.
 The foot pedal remains permanently in the selected position when pressed.
 The foot pedal must be put in the rest position before and after
Selector switch
Description
position
Set the selector switch on the side of the machine to the middle
Neutral/ position.
Position 0  The selector switch must always be set to the middle position
Set the selector switch on the side of the machine to the left position.
Selector switch
 The wheel head rotates clockwise (to the right) after pressing
to the left
Set the selector switch on the side of the machine to the right position.
Selector switch
 The wheel head rotates anticlockwise (to the left) after pressing
to the right
before and after operation.
the foot pedal.
the foot pedal.
Action at the pottery wheel
No rotation (standstill)
Maximum possible speed
Speed continuously adjustable between the
rest position and maximum speed
operation.
46 / 207 - EN -