Automatic Icemaker - GE Monogram ZIC30GNHII Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

A newly installed refrigerator may take 12–24
Automatic
hours to begin making ice. The refrigerator
icemaker
The icemaker will produce seven cubes per
period, depending on freezer compartment
temperature, room temperature, number of
door openings and other use conditions.
If the refrigerator is operated before the water
connection is made to the icemaker, set the
icemaker to OFF
press the ZONE indicator on the control pad
twice to select the freezer drawer. Press the ICE
icon to the right. The line under ICE will disappear
and the word OFF will show under ICE.
Throw away the first full bucket of ice.
Be sure nothing interferes with the sweep
of the feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes
will become cloudy, taste stale and shrink.
The icemaker is located on the ceiling of the
Accessing
freezer drawer and to the left rear. There is
the icemaker
an LED strip in the freezer drawer ceiling. The
and freezer
freezer drawer contains 1 ice bin.
drawer
8

Automatic Icemaker

30" Bottom-Freezer
Feeler Arm
After the icemaker has been turned on again,
there will be a delay of about 45 minutes before
the icemaker resumes operations.
NOTE: In homes with lower-than-average
water pressure, you may hear the icemaker
water valve cycle on several times when
making one batch of ice.
NOTE: Icemaker works best between
40 and 120 PSI home water pressure.
CAUTION
Avoid contact with the moving
parts of the ejector mechanism, or with the
heating element (located on the bottom of the
ice maker) that releases the cubes. Do not place
fingers or hands on the automatic ice making
mechanism while the refrigerator is plugged in.
(freezer models)
Icemaker

Publicité

Table des Matières
loading

Table des Matières