Agu MFP6 Mode D'emploi page 59

Rinse all parts under a stream of warm water and install all the parts back.
ATTENTION
Clean all parts that come into contact with food in hot water with the
addition of detergent after each use.
All parts except the main unit are dishwasher safe.
• If necessary, use a dry cloth to clean the main unit.
• Check the water tank and clean it if necessary (see «Instruction for
cleaning the water tank»).
• Check the steam outlet and clean it if necessary.
• Always keep the water tank dry.
WATER TANK DESCALING
Limescale may accumulate on the bottom of the water tank during prolonged
use of the device. Therefore, the water tank should be cleaned regularly, once
every 1–4 weeks.
Instruction on water tank descaling:
1
Add 15 g of citric acid and 150 ml of water to the tank.
2
Close the water tank cover.
3
Сlose the blender bowl cover and place the bowl in the device.
4
Press the water heating button
5
Turn of the water heating mode in 15 minutes.
6
After completion of the process, pour all liquid out of the tank.
7
Rinse the tank and the blender bowl with water several times.
8
Pour all water out of the tank.
EN
.
59