Device Cleaning - Agu MFP6 Mode D'emploi

5
Press the steamer button.
6 When the cooking process is completed, slightly push the button to click
off the steamer button and turn off the water heating
7
Open the bowl cover and remove the basket using the spatula.
BOIL-DRY PROTECTION
The boil-dry protection automatically switches off the heating element when there
is no water in the water tank.
In this case, add water to the tank and the device will continue operation.
ATTENTION
Open the water tank cover carefully to prevent steam burns.
10

DEVICE CLEANING

• Clean the device after each use.
• Never immerse the main unit in water.
• Do not use abrasive cleaners.
• Never pour bleach or chemical sterilizing solutions/tablets into the device.
DEVICE CLEANING PROCESS
Always unplug the device and remove the blender bowl.
1 Remove the blender bowl cover.
2
Remove the blades as shown in the figure below.
58
.