Olympia PS 407.2 CCD Mode D'emploi page 21

5.4 Inserting CDs, credit cards or floppy disks
Never attempt to shred more than 1 CD, 1 credit card or 1 floppy disk at a
Note:
time.
1. The device is switched on.
2. Insert the CD, credit card or floppy disk in the CD/credit card/floppy disk infeed slot.
5.5 Switching the device off
Set the On/Off switch to its OFF position.
6 Indicator Elements
Indicator
OVERHEAT lamp
lights up.
WASTE BIN FULL
lamp lights up.
POWER lamp lights up.
7 Motor Protection
The motor switches off automatically in the event of an overload. First of all, disconnect
the power plug from the power socket and allow the motor to cool down to room
temperature. Then connect the power plug to the power socket again and continue
operation.
Observe the operating cycle stipulated in Chapter "Technical Data".
Note:
Cause Solution
Let the motor cool down. Observe the
Motor has
operating cycle described in Chapter
overheated
"Technical Data".
Waste bin full The waste bin is full and must be emptied.
Device is ON
21