Opale-Paramodels Backpack M3 Manuel D'utilisation page 26

Remove, on both sides, the CHC M3-16 screw.
Insert the vertical plate of the kit. It has to slide be-
tween the horizontal plate and the X shaped plate at
the back of the frame.
Then tighten the plate with the CHC M3-16 screws
removed earlier.
Use the ergots on the vertical plate to maintain the
elastic. It will allow to hold the battery in the same
position.
Replace the screw with a CHC M3-20 on both sides.
Use the 2nd elastic to hold the upper battery part
and use the end of the screw to hold it.
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387
26