Installation Of The Landing Gear - Opale-Paramodels Backpack M3 Manuel D'utilisation

Installation of the landing gear

(optional)
Mount the wheel on the front fork with:
- 1 x CHC M4x50 screw
- 1 x M4 nut
- 4 x M4 washers
- 2 x M4 spacers ( placed on each side of the wheel)
Link the front fork to the main frame.
Use 1 x CHC M4-25 screw, 2 x M4 washers and 1 x M4
nut.
Tighten firmly the whole thing in order to maintain
the fork position.
Fix the wheel with 1 x M4x40 screw. Place first the M4
nut, and tight it enough but not too much in order to
preserve the wheel rotation on the wheel. Then place
the whole thing on the rear axle and tighten the nut
against the rear axle. The wheel can move freely.
Then do the same with the opposit wheel.
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387
23