Opale-Paramodels Backpack M3 Manuel D'utilisation page 19

Position the wing attachment part on the propring at-
tachment plate. Use 2 x CHC M4x30 with M4 washers
and M4 nuts.
Fix the 2 side bars with 4x CHC M3-16 with M3 wash-
ers and nuts.
Then on both sides of the bar, fix the linking part with
2 x CHC M3-16, washers and nuts.
Do the same on the opposit side.
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387
19