Opale-Paramodels Backpack M3 Manuel D'utilisation page 24

Assemble the frame and the rear axle with 2 x CHC
M3-25 screws, 2 x washers and 2 x nuts.
Place the silent blocs with some CHC M3-8 screws,
washers and nuts. The silent blocs ensure the me-
chanical junction between the landing gear and the
Backpack. It is necessary to place the 4 silent blocs.
Hold the front side of the landing gear frame with the
3mm G10 plate.
Use 2 x CHC M3-35 screws with 2 washers and 2 nuts.
The Backpack is now ready for the installation of a pilot
or a servo holder kit (optional).
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387
24