Opale-Paramodels Backpack M3 Manuel D'utilisation page 20

Assemble the 2 plates with 2 x CHC M3-8 screws and
M3 nuts.
Do the same on the opposit side. You will obtain a
part like shown on the picture.
Mount this part on the side bars with 4 CHC M3-16
screws, M3 washers and nuts.
Place the U steel part and fix it on the previous part
as shown on the picture with 4 x CHC M3-16 screws,
washers and nuts.
Then fix on this U steel part the other linking part with
2x CHC M3-16 screws, 4 washers and 2 nuts.
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387
20