On-Screen Display Menu Operation - Sharp AQUOS LC-50LE440U Mode D'emploi

On-Screen Display Menu

On-Screen Display Menu Operation

System Initial
Information
Options Setup
Select Menu Select Enter Exit
ENTER RETURN
1.
Press MENU to display the MENU screen.
Press / to select the desired menu.
2.
1
Press / to select a specific
2
adjustment item,
• Additional related adjustment items may be
displayed. Press
item.
Adjust the item while referring to the
3
guide display.
• Operations vary depending on the function
or item. Refer to the guide display
corresponding to the menu setting screen
for button operations.
3.
Press MENU to exit.
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the
actual screens.
• The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items
on the screen.
Example
Menu
Picture
Settings
Picture Settings
STANDARD
AV MODE
[STANDARD]
OPC
[On]
Backlight
[ 82]
Contrast
[ 51]
Brightness
[ 50]
Color
[ 50]
Tint
[ 0]
Sharpness
[ 10]
Advanced
Reset
and then press ENTER.
/ to select the desired
Example
System Initial
Information
Options Setup
Adjust Select Enter
ENTER RETURN
1
Guide display
• This indicates the buttons that can be operated
on the displayed screen. The guide display varies
depending on the menu setting screen.
• The operations for some selected items may be
displayed in the operational guide bar at the
bottom of the screen.
Item displayed in blue
2
• This indicates the item currently selected.
Press / to go to the adjustment screen for
•
this item.
3 Item in brackets
• This indicates the current setting for the item.
4
Item displayed in gray
• This indicates that the item can be selected.
5
Item displayed in black
• This indicates that the item cannot be selected.
There are various reasons why the items cannot
be selected, but the main reasons are as follows:
—Nothing is connected to the selected input
terminal.
The function is not compatible with the current
—
input signal.
Menu
Picture
Settings
Back Picture Settings
STANDARD
AV MODE
[STANDARD]
OPC
[On]
Backlight
[ 82]
Contrast
[ 51
Brightness
[ 50]
Color
[ 50]
Tint
[ 0]
Sharpness
[ 10]
Advanced
Reset
25