Publicité
Les langues disponibles
Les langues disponibles
3. Roll the belt off of the pulleys and install the new belt.
4. Replace the V-belt cover and re-attach the spark plug wire.
PIECES
Engine oil
Air filter
Tension transmission
belt
Spark plug
Muffler
Fuel sediment
deposits
Filter and fuel tank
Fuel inlet tube
11. STORAGE
- When storing engine for more than 30 days:
a) Store in a dry and clean area.
b) Run engine until fuel tank is empty and engine stops or add gasoline preservative and
running engine after adding for several minutes to circulate preservative.
1)
Place the chipper/shredder in a dry, level area. If the chipper/shredder is tipped it may
leak oil and gas.
2)
Drain all the fuel from the fuel tank and the carburetor ensure that all the fuel has been
removed.
3)
Change engine lubrication oil if necessary.
4)
Clean exterior surfaces of the engine.
5)
Do not store the chipper/shredder near an ignition source, such as wood stove, gas or
electric heater, or an appliance or heater with a pilot light.
6)
Remove the spark plug wire to prevent unauthorized starting.
7)
Store the chipper/shredder in a well ventilated area.
DO NOT store the chipper/shredder in an area that will allow toxic gas fumes into areas
inhabited by humans or animals.
8)
Close the discharge chute deflector and place the covers over the hopper and the
funnel to prevent objects or critters from getting into the machine.
9)
Cover engine well to prevent dust.
10) Keep the tool away from children.
- When the machine is stopped for servicing, inspection, or storage, or to change an accesory,
shut off the power surce, disconnect the spark plug wire from the spark, make sure that all
ACTION
Each
use
Level test
Change
check
Cleaning
Replace
Cleaning and
adjustment
Adjustment
Replacement
Cleaning
Cleaning
Cleaning
Check and
replace if
necessary
22
First
First 3
month/
months/
20
50
hours
hours
First 8
Each
months/
year/
100
300
hours
hours
Publicité
