Télécharger Imprimer la page

Lea LE56196-76 Mode D'emploi page 24

Publicité

Les langues disponibles

Les langues disponibles

Shredder away, move the lever to the passage of gasoline in the OFF position.
9. OPERATING INSTRUCTIONS
Make sure the plastic cover over the hopper is closed when the shredder is running. Splinter
can jump and be dangerous.
-
To move the machine pick it firmly grips of both hands, turn the wheel with your foot, lift
the machine, pay attention to the central bar of the machine and walk slowly.
-
Before start operating, check the wind direction to not work face to the gases.
-
Keep all warnings and reflectors in place and in good working condition.
-
Switch off the machine before refuel.
HOW TO WORK WITH THIS MACHINE
Cutting logs:
1. The long logs such as sunflowers, corn and tree branches are introduced by cutting the
side tube (nozzle) to be cut with the blade rotating.
2. Some logs will be pushed into the blades with the following logs, never use your hands.
3. The last log can be pushed with a stick of wood ever with their own hands.
4. Do not push the small branches with their hands, use wooden sticks.
5. When you enter the branches, make sure the thicker branches are to be pushed more
slowly than thin. The technique and practice will help you operate better.
6. Do not overfeed and do not feed wet, soggy material into the shredder as this may clog the
blade chamber and the discharge chute.
7. Not stand in front of the discharge chute and not try to open while the machine is operating.
8. Recap the nozzle when finished
Crushed twigs and leaves:
1. Leaves, twigs, grass and similar materials must be placed in the crusher in lots intertwined.
2. Do not open the plastic cover when you add more material.
3. Do not push the leaves and similar material with their hands, use wooden sticks.
4. Keep your face and body away from the hopper.
5. Do not overfeed and do not feed wet, soggy material into the shredder as this may clog the
blade chamber and the discharge chute. Stop the engine before clean up and use wooden
tools, never your hands and feet.
6. Do not clean the material with the engine running.
Right Way
Stand behind the machine - wear glasses and
Wrong Way
Do not put your face or hands in the hopper.
20

Publicité

loading