Publicité
Les langues disponibles
Les langues disponibles
Fuel kind
Sound pressure level (EN ISO 3744:1995)
Sound power level (EN ISO 180 11201:1995)
4. SAFETY RULES
Read all this instructions and warnings before start. This rules should be followed always to
reduce the risk of serious personal injury and/or arson. Become familiar with the owner's
manual before attempting to operate this equipment. Keep this manual to consult in the future.
•
Do not allow hands or any other part of the body or clothing inside the feeding chamber,
discharge chute, or near any moving part.
•
Keep your face and body away from the hopper.
•
Always stand clear of the discharge zone when operating this machine.
•
Be extremely careful that pieces of metal, rocks, bottles, cans or other foreign objects
are not
•
included.
•
Do not allow children to operate this equipment.
•
Do not operate the machine under the influence of alcohol, drugs or medicines.
•
Do not mount or remove parts of the machine while in operation.
•
Keep kids, pets or unauthorized staff 10 m away at least.
•
Do not run engine powered machines in an enclosed area since the exhaust from an
engine contains carbon monoxide, which is colourless, odourless and tasteless; Carbon
monoxide can be extremely dangerous in enclosed areas.
•
Avoid wearing clothing that is loose fi tting or that has hanging cords or ties.
•
Do not operate the machine on a paved or gravel surface where ejected material could
cause injury.
•
Wear ear protection and safety glasses at all times while operating the machine.
•
Before starting the machine, check that all screws, nuts, bolts, and other fasteners are
properly secured and that guards and screens are in place. Replace damaged or
unreadable labels.
•
Only operate the machine in an open space and on a firm, level surface.
•
Only operate the machine with dry weather and, never outside while it is raining.
•
Never use the machine if the security system is damaged or not working well.
•
Do not let the machine unattended and turn off the engine while you are not operating
with it.
•
If the cutting mechanism strikes any foreign objects or if the machine should start
making any unusual noise or vibration, shut off the power source and allow the machine
to stop. Disconnect the spark plug wire from the spark plug (electric unit disconnect
from supply).
•
Do not let using the machine to anybody who has never read the user manual or not
has been familiarised with it.
•
Operate with the machine while there is a good lightning conditions.
•
If the machine starts vibrating in a different way as usual, shut of the engine and verify
the cause -immediately. Vibration means another issues.
Unleaded 95º
16
96 dB (A)
110 dB (A)
Publicité
